Do You Need To Hire A Designer For Your Renovations?

Many designers do not have any academic training in either engineering or architecture; however, they do have experience in both simple additions and interior space planning. This means that if you’re planning to add on a family room or remodel your existing kitchen, a designer will likely have every one of the skills that you’ll require.

Normally, designers charge approximately $35 to $70 per hour for their services, as well as $1,500 for a full set of plans. (This data is from Interior Design Companies Surrey)A structural engineer will thoroughly review these plans to ensure that no beams will sag and no floors will bounce. This is the same type of process that architects follow as well simply as a precaution, despite the fact that they have only a small bit of engineering training. Regarding project management services, this is something that designers normally don’t offer.

Designers Who Are Licensed

Depending on the state in which you live, the laws that govern how a designer is licensed are different. While every state requires a designer to be fully licensed, the licensing itself is more of a proverbial gray area since the design of single-family homes are exempted from architectural licensing by a lot of states.

Regardless of what the specific policy in your state of residence may be, you should always look over your homeowner’s insurance policy. This may be something that you’ll have to update as well because both malpractice and professional liability are hardly ever covered. If a costly repair needs to be made and it’s unclear whether the contractor or designer is to blame for the repair, you may end up getting stuck paying for at least part of the bill.

Some designers also work for remodeling contractors. These companies, which are most commonly referred to as “design/build firms,” offer complete restoration packages that include everything from the plans to the paint. The overall project design itself is included in the final price.

Dealing With a Designer

Either a designer or one of the firms mentioned above will be able to handle a lot of residential remodeling projects. Even better is the fact that both the designer and the contractor work together as a team the entire time.

Once they meet with the homeowners, the designer and contractor will then schedule a second meeting. This will involve showing a partial set of drawings, which will often be just an outside wall rendering, rough floor plan, and elevation. The plans will be priced out by the contractor, but only after the homeowners approve the preliminary set of drawings.

Once the final budget has been adopted, the designer will then be commissioned to finish the drawings, which will help to avoid any further surprises whenever the final bill is presented to the homeowners. In a worst-case scenario, a full set of plans would have to be completely redrawn; however, the total cost would only be half of what an architect would normally charge.

When it comes to using a designer, there are also some drawbacks that are involved. For instance, only some state regulations cover designers, which means that you could be dealing with someone who only has a certain amount of education and skills. Companies such as http://www.thecurtaincall.com have seen these shady designers working alongside them before, they recommend that you look very carefully before hiring one.

Furthermore, designers are hardly ever insured against factors such as malpractice or negligence, unlike architects.

Richard